TEL: +86 18320188145 丨 Whatsapp:+86 13909754659 
Energy Saving Tips For Water Pumps Use
TIME：2024-06-03 Author：admin Views：
● Shorten the piping as much as possible
● Do not use " anti- aircraft gun'' type outlets. Because this type of outlet pipe increases energy consumption. At the same time to make the outlet of pump is facing the pool.
● Maximize the diameter of the outlet pipe.
● Remove clogs from pipes in time. Leave the clogs in the inlet pipe, impeller or guideway will reduce the water output.
● Try to use diewct coupling drive, this is because the direct coupling drive us more efficient than the belt drive.
● The filter can be removed while ensuring that the incoming water is clean.
● The pump should be carefully checked on the sealing parts of the pump to prevent the pump into the air. If the pump into the air, the amount of water will be significantly reduced.
● If it can be used an electric motor without diesel or gasoline engines, conditions with three-phase asynchronous motors without single-phase asynchronous motors.
● Do not use " anti- aircraft gun'' type outlets. Because this type of outlet pipe increases energy consumption. At the same time to make the outlet of pump is facing the pool.
● Maximize the diameter of the outlet pipe.
● Remove clogs from pipes in time. Leave the clogs in the inlet pipe, impeller or guideway will reduce the water output.
● Try to use diewct coupling drive, this is because the direct coupling drive us more efficient than the belt drive.
● The filter can be removed while ensuring that the incoming water is clean.
● The pump should be carefully checked on the sealing parts of the pump to prevent the pump into the air. If the pump into the air, the amount of water will be significantly reduced.
● If it can be used an electric motor without diesel or gasoline engines, conditions with three-phase asynchronous motors without single-phase asynchronous motors.
