TEL: +86 18320188145 丨 Whatsapp:+86 13909754659 
Maintenance Points Of Fluoroplastic Chemical Pumps
TIME：2024-09-04 Author：admin Views：
Correctly use the fluoroplastic chemical pump, do a good job of maintenance, and develop good habits to make the fluoroplastic chemical pump last longer. Most users do not have a deep understanding of the maintenance methods. In this regard, let me introduce to you the key points of maintenance of fluoroplastic chemical pumps.
1. Regularly inspect and repair important parts such as the pump body and motor of the fluoroplastic chemical pump.
2. Always pay attention to vulnerable parts and replace them in time if they are worn or damaged.
3. If the pump is not used for a long time, it should be inspected regularly, the flow channel inside the pump should be cleaned to ensure that there is no residual liquid, and the power supply should be cut off and the dust cover should be covered to take dust prevention measures.
4. The machine should be turned on and rotated strictly in the direction of the indicator sheet. Reversal and idling are strictly prohibited.
5. During use, the oil position should be checked in time. The oil should be replaced in time after a new pump is used for one week.
6. A system of designated person responsible, designated person using, and designated person supervising should be implemented.
7. Check the inlet and outlet of the pipeline to prevent foreign matter from entering the pump body and causing damage.
8. When shutting down, close the gate valve at the outlet first, and then cut off the power supply of the pump body.
9. Pay attention to the temperature of the conveying medium to prevent damage to the pump body sealing ring due to excessive temperature.
10. For pumps with too high a head, it is recommended to install a check valve on the outlet pipe to avoid water hammer damage caused by sudden shutdown.
It is very important to do a good job of daily maintenance of fluoroplastic chemical pumps. The maintenance rate of many equipment is high. If it is caused by non-standard operation and lack of attention to maintenance, many abnormal situations will definitely occur.
1. Regularly inspect and repair important parts such as the pump body and motor of the fluoroplastic chemical pump.
2. Always pay attention to vulnerable parts and replace them in time if they are worn or damaged.
3. If the pump is not used for a long time, it should be inspected regularly, the flow channel inside the pump should be cleaned to ensure that there is no residual liquid, and the power supply should be cut off and the dust cover should be covered to take dust prevention measures.
4. The machine should be turned on and rotated strictly in the direction of the indicator sheet. Reversal and idling are strictly prohibited.
5. During use, the oil position should be checked in time. The oil should be replaced in time after a new pump is used for one week.
6. A system of designated person responsible, designated person using, and designated person supervising should be implemented.
7. Check the inlet and outlet of the pipeline to prevent foreign matter from entering the pump body and causing damage.
8. When shutting down, close the gate valve at the outlet first, and then cut off the power supply of the pump body.
9. Pay attention to the temperature of the conveying medium to prevent damage to the pump body sealing ring due to excessive temperature.
10. For pumps with too high a head, it is recommended to install a check valve on the outlet pipe to avoid water hammer damage caused by sudden shutdown.
It is very important to do a good job of daily maintenance of fluoroplastic chemical pumps. The maintenance rate of many equipment is high. If it is caused by non-standard operation and lack of attention to maintenance, many abnormal situations will definitely occur.
-THE END-
